Loading ...
Loading ...
Loading ...
3.2 Count Mode
After turning the machine on it will default to count mode. To count bills, place them
in the hopper and follow the procedure described in 2.2 Bill Loading. The machine will
start counting automatically (if in AUTO mode) and move the bills from the hopper
to the stacker as it counts them. The machine will stop counting when the hopper is
completely emptied and the counted number of bills will be displayed on the screen.
Remove the bills from the stacker and place another stack into the hopper to count
another batch of bills. When the bills are removed from the stacker the screen will clear
itself of the previous count, or it can be cleared by pressing the “CLEAR” button.
3.3 Add Feature
This feature is available by pressing the “ADD” button. When this function is activated,
an “ADD” indicator is displayed on the home screen. The machine counts multiple stacks
of bills and keeps track of the total number of bills will be displayed on the bottom right
corner of the screen. When ready to count the next stack of bills, empty the stacker and
load the new stack to be counted into the hopper. The unit will continue counting and
add the new count to the total. To exit ADD mode, press the “ADD” button again.
3.4 Batch Feature
This feature is available by pressing the “BAT” button. When this function is activated, the
“BAT” indicator will be displayed on the screen along with the batch size. The machine
counts a preset number of bills. It beeps and stops counting when the batch number
has been reached, even if bills remain in the hopper. By default, the batch size is preset
to 100. You may press the “BAT” button repeatedly to cycle through different preset
batch quantities (100, 50, 20, 10), or use the “MG/+” and “UV/-” buttons to manually
select a desired batch size. To exit the BATCH function, press the “BAT” button until the
“BAT” indicator disappears from the screen.
9
Loading ...
Loading ...
Loading ...