Loading ...
Loading ...
Loading ...
SIGLENT
SDG2000X User Manual 39
To Set the Sampling Rate
1. Press Waveforms → Page 1/2 → Arb → TureArb → Srate, to set the
sampling rate parameter.
The sampling rate shown on the screen when the instrument is powered on is
the default value or the set value of last power on. When setting the function, if
the current value is valid for the new waveform, it will be used sequentially. If
you want to set the frequency for the waveform, press SRate/Frequency key
again, to switch to the frequency parameter (the current operation is displayed
in inverse color).
2. Input the desired sampling rate.
Use the numeric keyboard to input the parameter value directly, and press the
corresponding key to select the parameter unit. Or you can use the arrow keys
to select the digit you want to edit, and then use the knob to change its value.
Figure 2-20 Setting the Sampling Rate
Note:
The methods of setting the parameters of arbitrary signal are similar to sine
waveform function.
To select the built-in Arbitrary Waveform
Loading ...
Loading ...
Loading ...