SDG2042X User Manual

Loading ...

SIGLENT

28 SDG2000X User Manual

2.4 To Set Pulse Waveform

Press Waveforms key to select the waveform function, and press the Pulse

softkey. The pulse waveform parameters are set by using the pulse operation

menu.

The parameters for pulse waveforms include frequency/period, amplitude/high

level, offset/low level, width, rise/fall and delay. As shown in Figure 2-10, in the

soft key menu, select PulWidth. The pulse width parameter area is highlighted

in the parameter display window, and users can set the pulse width value

here.

Figure 2-10 Pulse Parameters Display Interface

Table 2-4 Menu Explanations of Pulse Waveform

Function

Settings

Explanation

Frequency/

Period

Set the signal frequency or period;