Loading ...
Loading ...
Loading ...
Page 25
Troubleshooting
Released quantity of rinse aid is
too much.
Decrease the re leased quantity of rin se aid. Refer to section
DIFFERENT SETTINGS FOR RINSE AID.
Quantity of detergent was too
much.
Make sure that you add the correct quantity of detergent in the
dispenser before you start a programme.
Multitab detergent tablets used
with a short programme might
not fully dissolve.
Select a longer programme when using Multitab detergent
table.t s.
Whitish streaks,
stains or bluish
layers on glasses
and dishes.
Dry water drop
stains on glasses
and dishes.
Rinse aid dosage is too low.
Increase the released quantity of rinse aid. Refer to section
DIFFERENT SETTINGS FOR RINSE AID.
Cleaning product too old, change the product.Quality of rinse aid or Multitab.
The dishes are
wet.
Programme had no drying
phase.
Programme had a low
temperature drying phase.
Open the door slightly and leave it ajar
(about 100 mm) to help the drying process.
Rinse aid dispenser is empty.
Quality of rinse aid or Multitab. Cleaning product too old; change the product.
Refill rinse aid into the dispenser and reset the rinse aid indicator.
The dishes are
wet and matte.
Problem Possible cause Possible solution
Loading ...
Loading ...
Loading ...