Loading ...
Loading ...
Loading ...
Page 13
Using Your Dishwasher
2
1. Press the button （A）to snap the dispenser cover
open.
2. Pour rinse aid into the circular（B）opening, making
sure not to fill beyond the MAX marking.
3. Close the cover, making sure it clicks shut.
B
A
How to Adjust Settings
To adjust the Rinse Aid level.
1.Machine in standby state.
2.Press and hold the modifier button for 3s until
the display shows .
3.Press the reservation button to adjust the
brightener gear, which can be set to , ,... .
4.Press the button to confirm the selection, press
and hold the power button for 2s to save the setting.
Different Settings for Rinse Aid
Rinse aid is added during the last rinsing phase to
dry the dishes without streaks and stains.
Detergent (e.g. powder, tablets, ...)
requires separate rinse aid:
Factory default setting: . No settings are
necessary.
The rinse aid is added from the rinse aid dispenser
only.
Detergent with multifunction (e.g. Multitabs)
combine detergent and rinse aid:
The rinse aid setting should be adjust to .
Please use the setting instructions in section HOW
TO ADJUST SETTINGS and select the setting.
The rinse aid is added from the rinse aid dispenser
in addition to the multitabs rinse aid.
Setting cuts off the rinse aid dosage and the rinse
aid indication. The higher the value for the higher
the dosage.
Usually the recommended setting performs well. In
case of streaks,stains, shimmer etc.; refer to section
TROUBLESHOOTING.
Fill the Rinse Aid Dispenser
Only use branded rinse aid for
dishwashers.Never fill the rinse
aid dispenser with any other
substances ( e.g. Dishwasher
cleaning agent, liquid detergent).
This would damage the appliance.
Child lock
This feature disables all the buttons on the dishwasher.
If any other buttons are pressed while Child lock is
activated, the Child lock indicator will flash for a few
seconds.
1.To activate Child lock, press and hold for 3
seconds.
2.The display will remain on ( if no programme has been
started it will continue to flash while the control panel is
locked ).
3.To cancel Child lock, press and hold for 3
seconds.
Loading ...
Loading ...
Loading ...