Loading ...
Loading ...
Loading ...
Page 11
Using Your Dishwasher
QUICK START GUIDE
For detailed operating method read the corresponding content on the instruction manual.
Compartment A:
C
ompartment :
For each wash cycle.
B:
For programmes with pre-wash only.
(Follow the !)
User Manual
Electric indicator on control panel (if provided).
Check the rinse aid level
Load the baskets
Select a programme
T urn on the water tap and press the Start/Pause Button. The machine will start working.
Running the dishwasher
Switch off the appliance
unload the baskets
Fill the detergent dispenser
Warning: wait a few minutes (about 15 minutes) before unloading the dishwasher to avoid handling
the dishes and utensils while they are still hot and more susceptible to break.
They will also dry better.Unload the appliance, starting from the lower basket.
Changing the programme
Add forgotten dishes in the
dishwasher.
Scrape off any large amount of leftover food. Soften remnants of burnt food in pans,
then load the baskets. Refer to the dishwasher loading instructions.
Close the door,press the Program Button until the selected program lights up.
( See the section entitled: Starting a Washing Program)
When the working cycle has finished, the buzzer of the
dishwasher will sound 8 times, then stop.
Turn off the appliance using the On/Off Button.
If the appliance was in standby mode, it will power off automatically after 30 minutes without any operation.
If the appliance is switched
off during a wash cycle.
If the appliance is switched off during a wash cycle, when switched
on again, please re-select the washing cycle and operate the dishwasher
according to the original Power-on state.
Switch on the appliance
Press the On/Off button to switch on the appliance, Open the door.
1. A running cycle can only be modified if it has been running for a short time. Otherwise the detergent
may have already been released and the water already drained. If this is the case, the detergent
dispenser must be refilled.
2. Press the Start/Pause button, press the program button for more than three seconds,the
machine will be in standby state, then you can change the program to the desired cycle setting.
3. Press the Start/Pause Button.
1.Press the Start/Pause Button to stop the washing.
2.Open the door a little .
3.After the spray arms stop working, you can open the door
completely.
4.Add forgotten dishes.
5.Close the door.
6.Press the Start/Pause Button.
WARNING!
Open the door carefully
Hot steam may escape
when the door is opened!
Loading ...
Loading ...
Loading ...