Loading ...
Loading ...
Loading ...
SEWING
Sewing Basics
57
2
b
Select the category you want.
c
Press the key of the stitch you want to sew.
• For details on stitch patterns, refer to “STITCH
SETTING CHART” on page 194.
• For details on the key functions, refer to “Key
Functions” on page 25.
• If necessary, change to the desired stitch width or
stitch length. (page 62)
The symbol of the correct presser foot will be
displayed in the upper left corner of the LCD screen.
d
Install the presser foot (page 50).
e
Set the fabric under the presser foot. Hold the fabric
and thread in your left hand, and rotate the handwheel
to set the needle in the sewing start position.
f
Lower the presser foot.
* You do not have to pull up the bobbin thread.
g
Adjust the sewing speed with the speed control slide.
* You can use this slide to adjust sewing speed during
sewing.
h
Press the “Start/Stop” button to start sewing.
* Guide the fabric lightly by hand.
i
Press the “Start/Stop” button again to stop sewing.
j
Press (Thread cutter button) to trim the upper
and bobbin threads.
The needle will return to the up position
automatically.
CAUTION
• Always use the correct presser foot. If the
wrong presser foot is used, the needle may
strike the presser foot and bend or break,
possibly resulting in injury.
Refer to “STITCH SETTING CHART” on
page 194 for presser foot recommendations.
1 Slow
2 Fast
Memo
• When the foot controller is being used, you cannot
start sewing by pressing the “Start/Stop” button.
CAUTION
• Do not press (Thread cutter button) after
the threads have been cut. Doing so could
tangle the thread or break the needle and
damage the machine.
• Do not press (Thread cutter button) when
there is no fabric set in the machine or during
machine operation. The thread may tangle,
possibly resulting in damage.
a
b
Loading ...
Loading ...
Loading ...