Loading ...
Loading ...
Loading ...
www.insigniaproducts.com
36
6 Drill 3/8 in. holes through the template at points A and C.
7 Cut a 2 in. (5 cm) diameter hole at point D for the power cord.
8 Remove the template.
9 If you have recessed cabinets:
• Make two filler blocks out of scrap wood pieces the size of shaded areas G and H. They must be as thick as the depth
of the cabinet recess.
• Drill 3/8 in. holes in the filler blocks to align with points A and C.
• Align the blocks with the corresponding holes in the cabinet. They should be at the same level as the bottom edge of
the cabinet frame.
CAUTION: Wear safety goggles when drilling holes in the cabinet bottom.
Filler blocks
Loading ...
Loading ...
Loading ...