Loading ...
Loading ...
Loading ...
www.insigniaproducts.com
22
4 Slide the top of the (new) charcoal filter into the top of the filter cavity, then press the bottom of the filter to place it into
the correct position.
5 Reinstall the vent by sliding the bottom of the vent into place, then push the vent top into position and slide it into
place. Replace the two vent mounting screws located on top of the microwave using a #1 Phillips screwdriver.
6 You’re finished! Skip to Before using your microwave
on page 42.
Charcoal filter
Screws
Loading ...
Loading ...
Loading ...