Loading ...
Loading ...
Loading ...
www.insigniaproducts.com
19
1.7 Cu. Ft. Over-the-Range Microwave
Step 7: Option A (recirculating) - Mount the microwave
1 Lift the microwave, tilt it forward, and hook the slots on the back bottom edge onto the four lower tabs of the
mounting plate, then rotate the front of the microwave up against the bottom of the cabinet.
2 To attach the microwave oven to the top cabinet, insert two self-aligning machine screws through the holes you drilled
in the bottom of the cabinet. Turn each screw at least two full turns after the threads have engaged (they will be fully
tightened later).
You’ll need:
CAUTIONS:
• For easier installation and personal safety, we recommend that two people install this product because of the weight. We highly
recommend professional installation if any electrical or carpentry work is required.
• Do not grip or use the handle or heat shield during installation.
• If your cabinet is metal, insert the nylon grommet into the power cord hole to prevent cutting the cord.
Notes:
• We recommend using filler blocks if the front of the cabinet hangs below the cabinet’s bottom shelf.
• If filler blocks are not used, damage may occur from over-tightening the screws.
• Be sure to keep the power cord tight.
• Do not pinch the cord, especially when mounting flush to the bottom of the cabinet.
CAUTIONS:
• Be sure that you keep the power cord tight.
• Be careful not to pinch the power cord, especially when mounting flush to the bottom of the cabinet.
Nylon grommet
(for metal cabinets)
Self-aligning machine
screws
Grease filters
Phillips screwdrivers
Thread the power cord through the
cable hole in the top cabinet. Keep it
tight throughout steps 1-2.
Front of cabinet
Bottom shelf of cabinet
Filler block (optional)
Self-aligning machine screw
Top of microwave
Equivalent to depth of cabinet recess
Loading ...
Loading ...
Loading ...