Loading ...
Loading ...
Loading ...
www.insigniaproducts.com
24
Step 5: Option B (outside back exhaust) - Attach the mounting plate to the wall
1 Remove the rear wall template.
2 Remove the mounting plate from the back of the microwave oven.
3 Insert the bolt(s) through the front of the mounting plate into the hole(s) that are not going into a stud, and then
reattach the toggle wings ¾ in. (19 mm) onto each bolt. Hold your mounting plate up to holes in your wall to identify
the correct position.
4 Place the mounting plate against the wall and insert the toggle wings into the holes you drilled in the drywall. Pull the
mounting plate away from the wall to help tighten the toggle wings.
You’ll need:
Notes:
• Depending on your stud locations, your installation may look different. You should insert toggle bolts into drywall and wood screws
into studs.
• Attach the mounting plate to the wall using toggle bolts. At least one wood screw must be used to attach the plate to a wall stud.
Note: The top of the mounting plate is indicated with an arrow. The mounting plate’s hooks are on the front.
Wood screws
Mounting plate
Phillips screwdrivers
Toggle bolts (2)
Screws
Screws
Mounting plate
Loading ...
Loading ...
Loading ...