Hikvision IDS-2CD7546G0-IZHSY 2.8-12MM User Manual

Loading ...

7.2 SNMP

You can set the SNMP network management protocol to get the alarm event and excepon

messages in network transmission.

Before You Start

Before seng the SNMP, you should download the SNMP soware and manage to receive the

device informaon via SNMP port.

Steps

Go to the sengs page: Conguraon → Network → Advanced Sengs → SNMP .

Check Enable SNMPv1, Enable SNMP v2c or Enable SNMPv3.

Note

The SNMP version you select should be the same as that of the SNMP soware.

And you also need to use the dierent version according to the security level required. SNMP v1

is not secure and SNMP v2 requires password for access. And SNMP v3 provides encrypon and

if you use the third version, HTTPS protocol must be enabled.

Congure the SNMP sengs.

Click Save.

7.3 Set SRTP

The Secure Real-me Transport Protocol (SRTP) is a Real-me Transport Protocol (RTP) internet

protocol, intended to provide encrypon, message authencaon and integrity, and replay aack

protecon to the RTP data in both unicast and mulcast applicaons.

Steps

Go to Conguraon → Network → Advanced Sengs → SRTP .

Select Server Cercate.

Select Encrypted Algorithm.

Click Save.

Note

●

Only certain device models support this funcon.

●

If the funcon is abnormal, check if the selected cercate is abnormal in cercate

management.

7.4 Port Mapping

By seng port mapping, you can access devices through the specied port.

Network Camera User Manual

Loading ...

Hikvision IDS-2CD7546G0-IZHSY 2.8-12MM iDS-2CD7546G0-IZHSY 4MP Outdoor Network Dome Camera