Hikvision IDS-2CD7546G0-IZHSY 2.8-12MM User Manual

Loading ...

Steps

Go to Conguraon → Event → Smart Event → Scene Change Detecon .

Click Enable.

Set the Sensivity. The higher the value is, the more easily the change of scene can be detected.

But the detecon accuracy is reduced.

Refer to Set Arming Schedule for seng scheduled me. Refer to Linkage Method Sengs for

seng linkage method.

Click Save.

Note

The funcon varies according to dierent models.

6.2.4 Set Intrusion Detecon

It is used to detect objects entering and loitering in a pre-dened virtual region. If it occurs, the

device can take linkage acons.

Steps

Go to Conguraon → Event → Smart Event → Intrusion Detecon .

Check Enable.

Select a Region. For the detecon region sengs, refer to Draw Area .

Set rules.

Sensivity Sensivity stands for the percentage of the body part of an acceptable target

that enters the pre-dened region. Sensivity = 100 - S1/ST × 100. S1 stands

for the target body part that goes across the pre-dened region. ST stands for

the complete target body. The higher the value of sensivity is, the more

easily the alarm can be triggered.

Threshold Threshold stands for the threshold for the me of the object loitering in the

region. If the me that one object stays exceeds the threshold, the alarm is

triggered. The larger the value of the threshold is, the longer the alarm

triggering me is.

Detecon

Target

Human and vehicle are available. If the detecon target is not selected, all the

detected targets will be reported, including the human and vehicle.

Target

Validity

If you set a higher validity, the required target features should be more

obvious, and the alarm accuracy would be higher. The target with less obvious

features would be missing.

Network Camera User Manual

Loading ...

Hikvision IDS-2CD7546G0-IZHSY 2.8-12MM iDS-2CD7546G0-IZHSY 4MP Outdoor Network Dome Camera