Loading ...
Loading ...
Loading ...
6.
Set linkage method. See Linkage Method Sengs .
7.
Click Save.
Note
The funcon is only supported by certain models. The actual display varies with models.
6.1.6 Set Vibraon Detecon
It is used to detect whether the device is vibrang. The device reports an alarm and triggers linkage
acons if the funcon is enabled.
Steps
1.
Go to Conguraon → Event → Basic Event → Vibraon Detecon .
2.
Check Enable.
3.
Drag the slider to set the detecon sensivity. You can also enter number to set the sensivity.
4.
Set the arming schedule. See Set Arming Schedule .
5.
Set the linkage method. See Linkage Method Sengs .
6.
Click Save.
Note
The funcon is only supported by certain models. The actual display varies with models.
6.2 Smart Event
Note
●
The funcon varies according to dierent models.
●
To enable this funcon, you may need to select Smart Event on VCA Resource page. For certain
models, this funcon is supported in the Single Channel mode. See for details.
●
For certain models, when the smart events are in use, the EIS is unavailable.
6.2.1 Detect Audio Excepon
Audio excepon detecon funcon detects the abnormal sound in the surveillance scene, such as
the sudden increase/decrease of the sound intensity, and some certain acons can be taken as
response.
Steps
1.
Go to Conguraon → Event → Smart Event → Audio Excepon Detecon .
2.
Select one or several audio excepon detecon types.
Audio Loss Detecon
Detect sudden loss of audio track.
Network Camera User Manual
39
Loading ...
Loading ...
Loading ...