Tripp Lite SR33UBAC Owner's Manual

Loading ...

Enclosure Installation

After lowering each leveler, use the carpenter’s level to conrm

that the enclosure is level in all directions. Adjust the levelers as

required until the enclosure is level.

In order to secure the cabinet to the building structure for stability,

attach the 2 shipping brackets using the hardware that attached the

enclosure to the shipping pallet. Use a 13 mm open-end wrench to

connect the brackets to the front and rear bracket mounting points

of the enclosure. Attach the brackets to secure mounting points in

the oor using user-supplied hardware or Tripp Lite’s SmartRack

Bolt-Down Kit (Model: SRBOLTDOWN).

Ground Connection

All the parts of the enclosure are grounded to the frame of the

enclosure. Use the enclosure’s bottom panel with marked M6 grounding

stud and user-supplied ground wire to connect directly to your facility’s

earth ground connection. Route the ground wire through the brushes

in the panel under the enclosure’s frame to ensure unhindered door

operation

. WARNING: Attach each enclosure to earth ground

separately. Do not use the enclosure without an earth ground

connection.

EARTH

GROUND

Loading ...

Tripp Lite SR33UBAC SmartRack 33U Standard-Depth Rack Enclosure Cabinet for SRCOOL3KTP Top-of-Rack Air Conditioner