Tripp Lite SR33UBAC Owner's Manual

Loading ...

Equipment Installation

WARNING: Do not install equipment until you have stabilized the enclosure. Install heavier equipment rst and

install it toward the bottom of the enclosure. Install equipment starting from the bottom of the enclosure and

proceeding toward the top of the enclosure - never the reverse. If using sliding equipment rails, be careful when

extending the rails. Do not extend more than one set of sliding equipment rails at one time. Avoid extending

sliding equipment rails near the top of the enclosure.

Note: The square holes at the middle of each rack unit are numbered and also include a small notch to aid identication. A single rack

unit includes the space occupied by the numbered hole and the holes directly above and below.

Note: Before installing equipment, remove the brackets as shown in the image below.

1 Rack Unit

1 Rack Unit (1U)

Installing or Removing Cage Nuts

WARNING: The anges of the cage nuts should engage the sides of the square opening in the rail, not the top

and bottom. Follow the instructions in your equipment documentation to ensure proper installation of your

equipment.

Installing Cage Nuts

Locate the numbered square openings in the mounting rails

where you plan to install your equipment. You will install cage

nuts (included) into the square openings in order to provide an

attachment point for the mounting screws (included).

Note: Consult your equipment documentation to determine how many cage

nuts will be required and where they will need to be installed.

From the inside of the mounting rail, insert one of the anges of

the cage nut through the square opening. Press it against the side

of the square opening. Each ange should engage one side of the

square opening, not the top or bottom.

Loading ...

Tripp Lite SR33UBAC SmartRack 33U Standard-Depth Rack Enclosure Cabinet