Loading ...
Loading ...
Loading ...
To operate the product
Automatic shutdown function
The product has an automatic shutdown function that
stops the product if the product is not used. The green
LED for start/stop indication goes off and the product
stops after 120 seconds.
To start the SavE function
The product has a power saving function. The SavE
function gives the longest operation time from the
battery.
1. Push the SavE button to start the function. The
green LED comes on to show that the function is
on.
2. Push the SavE button again to stop the SavE
function.
To change the operation direction of the
trimmer head
It is possible to change the operation direction of the
trimmer head. This can be done at full speed or at stop
position. In the factory, the trimmer head is set to turn
clockwise. The green LED is off when the trimmer head
turns clockwise.
1. Push the operation direction button to make the
trimmer head turn counterclockwise. The green LED
is on when the trimmer head turns counterclockwise.
Note:
It is easier to tap out the trimmer line to make it
longer when the trimmer head turns clockwise.
To loosen cut material from the grass blade/grass cutter
If a grass blade/grass cutter is used, the rotation
direction is counterclockwise. A green LED shows that
the grass blade/grass cutter rotates counterclockwise.
Change rotation direction to clockwise to loosen the cut
material from the grass blade/grass cutter.
1. Push the rotation direction button to change the
rotation direction.
Note: When the rotation direction is changed to
clockwise, cut material is loosened from the grass blade/
grass cutter. The speed of the grass blade/grass cutter
decreases for a short period of time before it rotates
counterclockwise again.
To balance the product
• Connect the harness to the support hook (A) or the
loop hanger (B) on the product.
B
A
• Keep the cutting attachment parallel to the ground.
• The product is correctly balanced when the blade is
at cutting height near the ground.
To trim grass with a trimmer head
To trim the grass
1. Hold the trimmer head immediately above the
ground at an angle. Do not push the trimmer line
into the grass.
2. Decrease the length of the trimmer line by 10-12
cm / 4-4.75 in.
3. Decrease the engine speed to decrease the risk of
damage to plants.
24
757 - 007 - 09.11.2022
Loading ...
Loading ...
Loading ...