Loading ...
Loading ...
Loading ...
4. Adjust the handle to put the product in a good work
position.
5. Tighten the knob fully.
To assemble the loop hanger
1. Push the lock piece (A) into the loop hanger.
A
2. Put the loop hanger on the shaft.
3. Connect the ends of the loop hanger.
4. Install the bolt.
5. Put the knob on the bolt.
6. Tighten the knob.
To assemble the trimmer guard
1. Install the correct trimmer guard for the trimmer
head, refer to
Accessories on page 31
.
2. Hang the trimmer guard on the hook on the plate
holder (A).
3. Bend the trimmer guard around the shaft and attach
it with the bolt (B) on the opposite side of the shaft.
A
B
To assemble the blade
CAUTION: Only use the approved
blade guard for the blades. Refer to
Accessories on page 31
.
1. Put the gear of the product on a flat surface to make
sure that the blade is assembled correctly.
2. Attach the blade guard (A) onto the shaft, refer to
To
assemble the trimmer guard on page 20
.
A
B
D
E
F
G
C
3. Install the drive disc (B) on the output shaft.
4. Turn the output shaft until one of the holes in the
drive disc aligns with the related hole in the gear
housing.
5. Tighten the locking bolt (C) with the hex key to lock
the shaft.
6. Put the blade (D) and support cup (E) on the output
shaft.
7. Put the cup washer (F) on the output shaft.
20
757 - 007 - 09.11.2022
Loading ...
Loading ...
Loading ...