Loading ...
Loading ...
Loading ...
several operators are working
in the same area the safety
distance should be at least 15
metres. Otherwise there is a
risk of serious personal injury.
Stop the product immediately
if anyone approaches. Never
swing the product around
without first checking behind
you to make sure that no one
is within the safety zone.
•
Ensure that people, animals
or other things can not affect
your control of the product
or that they do not come
in contact with the cutting
attachment or loose objects
that are thrown out by the
cutting attachment. However,
do not use the product unless
you are able to call for help in
the event of an accident.
•
Always inspect the working
area. Remove all loose
objects such as stones,
broken glass, nails, steel
wire, string, etc., that could
be thrown out or become
wrapped around the cutting
attachment.
•
Make sure that you can move
and stand safely. Check
the area around you for
possible obstacles (roots,
rocks, branches, ditches,
etcetera) in case you have to
move suddenly. Take great
care when you work on
sloping ground.
•
Keep a good balance and a
firm foothold at all times. Do
not overreach.
•
Deactivate the product before
you move to another area.
•
Never put the product down
unless you have deactivated
it and removed the battery.
Do not leave the product
unsupervised when it is
switched on.
•
Remove the battery before
you pass the product to
another person.
•
Make sure that no clothes
or parts of the body come
in contact with the cutting
attachment when the product
is activated. Keep the product
below waist level.
•
If anything jams in the
cutting attachment while you
operate the product, stop
and deactivate the product.
Make sure that the cutting
attachment stops completely.
Remove the battery before
you clean, inspect or repair
the product and/or the cutting
equipment. There is a risk of
burns as the gear housing
can become very hot. Use
gloves when working with the
cutting attachments.
10
757 - 007 - 09.11.2022
Loading ...
Loading ...
Loading ...