Loading ...
Loading ...
Loading ...
3. Make sure that the power trigger and the lock moves
freely and that the return spring works properly.
4. Start the product, see
To start the product on page
23
.
5. Apply full throttle.
6. Release the power trigger and make sure that the
cutting attachment stops and remains still.
To do a check of the cutting attachment guard
WARNING: Do not use
a cutting attachment
without an approved
and correctly attached
cutting attachment guard.
Always use the
recommended cutting
attachment guard for the
cutting attachment that
you use, see
Product
overview on page 2
. If
an incorrect or faulty
cutting attachment guard
is attached this can
cause serious personal
injury.
The cutting attachment guard stops objects that ejects in
the direction of the operator. It also prevents injuries that
occur if you touch the cutting attachment.
1. Stop the motor.
2. Do a visual check for damages, for example cracks.
3. Replace the cutting attachment guard if it is
damaged.
To do a check of the locknut
WARNING: Stop the motor,
use protective gloves
and be careful around
the sharp edges of the
cutting attachment.
• Make sure that the locknut is attached and tightened
correctly. See
To attach and remove the locknut on
page 21
.
Quick release function of the harness
WARNING: Do not use
the harness if the
quick release function
is defective. Make
sure that the quick
release function operates
correctly when you adjust
the product.
WARNING: If the product
is not safely attached to
the harness, you can not
control the product and
that can result in injury to
you or others.
16 757 - 007 - 09.11.2022
Loading ...
Loading ...
Loading ...