Loading ...
Loading ...
Loading ...
SECTION 2 HOW YOUR WATER SOFTENER WORKS
I
2A. FACE PLATE TIMER FEATURES
RECHARGE NOW-- If you have guests visiting,
or other times when you use n]ore water than
usual, you could begin to run out of soft water. If
the softener is not scheduled to regenerate for
another day or 2, you would get hard water until
then. If this happens, or you think it might
happen, press and hold in the HOLD-RECHARGE
NOW button [] for 3 seconds until RCHG shows.
RCHG will flash in the display during the
regeneration, which lasts under 2 hours.
NOTE:
Avoid using HOT water while the softener
regenerates, because bypass hard water will refill
the water heater (see "Automatic Bypass," page
13).
PRESENT TIME
RECHARGE TIME
RECHARGE DAY
_ SET!CLEAR
Q ON/OFF VACATION
HOLD RECHARGE NOW
VACATION -- The day you leave on vacation, or
other long absence, press (do not hold in) the
ON/OFF VACATION button []. VAC begins to
flash in the display (FIG. 6). The timer will keel)
time, but the softener will not regenerate to waste
water and salt.
NOTE:
Whie in VACATION, the softener will go through a
regeneration if the RECHARGE NOW feature is
used (see above).
To shut off the water supply to the softener, use
the plumbing bypass valve(s), FIG. 16, page 21.
WHEN YOU RETURN, press the VACATION,
button again to return the softener to service, and
the correct time of day in the display. Remember
to do this or the softener will not regenerate
and you will soon have hard water.
I
IJFI[
Q PRESENT TIME
Q RECHARGE TIME
G RECHARGE DAY
SET/CLEAR
Q ON'OFF VACATION
HOLD RECHARGE NOW
ERROR CODE -- An error code could appear in
the face plate display if a problem occurs in the
softener electronics. If you see an error code
instead of the present time of day, please call you
local Sears Service Department for service.
';_-3
Continued
9
Loading ...
Loading ...
Loading ...