Loading ...
Loading ...
Loading ...
14
NOTE:
These conversions should only be carried out by
qualified persons. All connections must be
checked for leaks before re-commissioning the
appliance.
Adjustment of components that have
adjustments / settings sealed (e.g. paint sealed)
can only be adjusted in accordance with the
following instructions and shall be re-sealed
before re-commissioning this appliance.
For relevant gas specifications refer to ‘Gas
Specifications Tables’ at rear of this section.
- NAT Gas / LPG / Butane Only.
1. Unscrew cap on regulator and rotate pin to the
setting shown in ‘Gas Specifications’ tables
overleaf.
2. Refit cap to regulator.
NOTE:
Gas regulator supplied is convertible between
Natural Gas and LP Gas, but it’s outlet pressure is
fixed ex-factory and is NOT to be adjusted.
1. Open the cabinet door.
2. Remove main burner injector and replace with
correct size injector as shown in Gas
Specifications Table.
1. Remove the following:-
Gas supply tube to pilot burner.
NOTE:
Appliances fitted with piezo igniter electrodes,
remove electrode from mounting bracket before
unscrewing pilot supply tube.
2. Remove pilot burner injector and replace with
correct size injector as shown in ‘Gas
Specifications Table’ at rear of this section.
3. Refit the following:-
Gas supply tube to pilot burner.
Piezo igniter electrode.
Main Burner
Injector
Thermocouple
Piezo
Igniter
Pilot Burner
NOTE, Pin rotated
for Natural Gas
NOTE, Pin rotated
for LPG / Butane
Loading ...
Loading ...
Loading ...