Installation Instructions
Wireless Doorbell Adapter
RPWL4045A2000
Read before installing
Preparation
Adapter
Wall Anchors
Round Head
Screws
Phillips Screwdriver
Standard Screwdriver
Drill and 1/4 in. (6 mm) drill bit
To install you will needIn the box you will find
CR2032 Battery
Wall Plate
Safety
Turn Power OFF. To protect yourself and your equipment, turn off the power at
the breaker box that controls your doorbell.
Before proceeding with the installation, please note the following safety warnings:
• Always follow the manufacturer’s advice when using power tools and wear suitable
protective equipment (e.g. safety goggles) when drilling holes, etc.
• Before drilling holes in walls, check for hidden electricity cables and water pipes. The
use of a cable/pipe locator is advisable if in doubt.
Loading ...
Loading ...
Loading ...
