Insignia NS-XBGH - Wired Stereo Headset for Xbox Series XS & Xbox One - Black

Product's Documents

Below are documents related to this product, you can read online or download:
NS-XBGH photo

User Manual

This is the main product document for model NS-XBGH.

The file format is pdf, 8 pages, you can download this manual here .

background
PACKAGE CONTENTS
Before using your new product, please read these instructions to prevent any damage.
NS-XBGH
QUICK SETUP GUIDE
• Stereo Gaming Headset
• Quick Setup Guide
Please see www.insigniaproducts.com for the latest
Quick Start Guide and troubleshooting.
Stereo Gaming Headset
for Xbox® Series X | S
and Xbox One®
background
FEATURES
Compatible withXbox Series X | S and Xbox One controllers
with a 3.5mm headset jack.
40mm High-denition driver
Cushions made of breathable mesh
On ear volume control dial on ear cup
To prevent possible hearing damage, do not listen at high
volume levels for long periods, do not use the headphones
while driving or cycling, or in any situation where you
should be able to hear other sounds.
As a guide to setting the volume level, check that you can
still hear your own voice when speaking normally while
listening with the headphones.
SAFETY INFORMATION
background
SETTING UP YOUR HEADSET
1 For Xbox One Controllers only: Check the base of your Xbox
One controller rst to make sure your controller has a 3.5mm
port for audio. If it does not, you will need to purchase a
speparate Xbox One stereo headset adapter(Not included).
2 Insert the Stereo headset’s 3.5mm audio plug into the
controller audio output jack.
3 Press X button on the Xbox One controller>> Select “System”
>> Select “Audio Devices”.
4 Set Volume control level to maximum.
5 Set Mic monitoring to your preferred level.
WARNING: Extended exposure to high volumes when using
your headset may result in permanent hearing loss.
background
MIC MUTE
1 Mic Boom up to mute.
2 Mic Boom down to unmute.
NOTE: For optimal microphone performance, make sure to
adjust the microphone sensitivity in the audio settings of your
gaming console. This should be checked each time you play
as dierent games, dierent controllers, and dierent consoles
all impact microphone performance. It may also help to unplug
the headset cable and plug in back in to the controller.
2
1
background
ADJUST VOLUME
1 Turn volume dial on ear cup to preferred audio level.
background
If you encounter problems, try the solutions below:
No sound from your headset.
• Check that 3.5mm plug is securely connected to the
controller audio output jack .
• Check your audio settings to ensure your headset is selected
as the assigned audio device.
• Check that the volume dial is not turned to minimum.
Your Mic is not transmitting sound.
• Check your audio settings to ensure your headset is selected
as the assigned audio device.
• Move mic down from vertical (mute) position
• Move your microphone closer to your mouth.
TROUBLESHOOTING
background
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Warning: : Changes or modications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to operate
the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Increase the separation between the equipment and receiver.Reorient or
relocate the receiving antenna.
- CIncrease the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
LEGAL NOTICES
FCC Information
background
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada)
www.insigniaproducts.com
This product is not sponsored or approved by Microsoft.
INSIGNIA is a trademark of Best Buy and its aliated companies.
Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richeld,
MN 55423 U.S.A. ©2021 Best Buy. All rights reserved.
Made in China
ENGLISH V3-22-0228
ICES-003 Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet apparel numérique de la classe B estconforme à la norme NMB-003 du Canada.

Specifications

Insignia NS-XBGH Questions and Answers