Loading ...
Loading ...
Loading ...
6
3. INSTALLATION
3.1 INSPECT THE CONTENT OF THE BOX
• Inspect the exterior of the unit for shipping damage. Ensure that there is no damage to the door, door latches, ports, power
cord, etc.
±3”
VD0514A
A
B
• Inspect the inside of the unit for damage. Ensure that blower
assembly, heat recovery core, core filters, insulation, dampers,
prefilter and HEPA filter (EVO5 700 HRV HEPA and HRV 7.1
HEPA units only), etc. are all intact, then reinstall the door.
NOTE: On EVO5 700 HRV HEPA and HRV 7.1 HEPA units only,
write the installation date on the HEPA filter frame for future
reference (see illustration at right).
TOP
DESSUS
FRONT
AVANT
Instal. date:
Date d’instal. :
__ / __ / ____
21293
FRONT
AVANT
Instal. date:
Date d’instal. :
__ / __ / ____
VD0309
• Unlatch, open (A) and remove (B) the unit door.
In order to prevent damages to the door hooks, do not open completely
the unit door; tilt it about 3” from the unit base and lift it up. See
illustration at right.
CAUTION
• Remove the transport tape over the heat recovery core of the unit.
NOTE: Before proceeding to the installation, check the content of the box. If items are missing or damaged, contact the
manufacturer. Remove all packaging material from the unit.
Loading ...
Loading ...
Loading ...