Broan HRV51 INSTALLATION INSTRUCTIONS AND USER GUIDE

Loading ...

4. CONTROLS (CONT’D)

 Detach the faceplate from the mounting plate by pulling the bottom part. If necessary, bore the

mounting holes and insert anchors.

Run the cable (4 wires) through the opening of the mounting plate and mount the plate to the

wall using 2 screws (included in the unit parts bag).

VC0130

VC0129

Always disconnect the unit before making any connections. Failure in disconnecting power could result in

electric shock or damage of the wall control or electronic module inside the unit.

WARNING

Failure to comply with the following can cause erratic operation of the unit and/or the wall control:

• Never install more than one main wall control per ventilation unit;

• Keep control low voltage wiring at least 1 foot (305 mm) away from motors, lighting ballast, light dimming

circuit and power distribution panel. Do not route control wiring alongside house power wiring;

• Ensure the wires are securely connected.

CAUTION

4.3 MAIN WALL CONTROL INSTALLATION

 Route the control cable (included) from the unit to a convenient location for the wall control.

 Loosen the locking screw (the screw should not be removed).

VC0128

These units should be controlled using a main wall control (included).

NOTE: If an optional auxiliary control is used, if activated, this auxiliary control will override the main control operation.

Loading ...

Broan HRV51 HRV 5.1 The Comfortable Solution