Loading ...
Loading ...
Loading ...
9.1.8.3. Using the Looper Touch Strip with a DAW
When the MIDI Send/Receive parameter is enabled, the activity on the Looper Strip can be
recorded in a DAW. By default, MIDI CC 9 values will be sent, but you can select a different
MIDI CC# as described above.
The Looper Touch Strip will send only the following values:
Looper Touch Strip Region MIDI CC value
1/4 25
1/8 50
1/16 75
1/32 100
release value 0
However, if you draw a controller curve for the Looper Touch Strip in your DAW, the KeyStep
Pro will respond to the values in the following way:
MIDI CC value received Looper Touch Strip region selected
1-25 1/4
26-50 1/8
51-75 1/16
76-100 1/32
9.1.9. Drum Map
Drum Map Parameter Values
Mode Chromatic, Custom
Config Chromatic Low note (1-103)
Custom note 1...24 (36-127)
There are four options for the MIDI note assignments of the keys in Drum mode:
In the Mode menu, you can select whether you want to map your Drum Track notes in the
standard chromatic way or to create a custom mapping.
Utility>Drum Map>Config>Chromatic: enables you to set the Chromatic Low note: which note
the lowest key will trigger when Track 1 is in Drum mode. All keys above that lowest key will
be mapped relative to this note.
Utility>Drum Map>Config>Custom: Enables you to link each of the 24 Drum keys on the
keyboard to a MIDI note number in the range 0 to 127. The default mapping starts at MIDI
note 36.
♪: MIDI notes that are already used by another note are not displayed when navigating the list.
Arturia - User Manual Keystep Pro - KeyStep Pro Configuration 153
Loading ...
Loading ...
Loading ...