Loading ...
Loading ...
Loading ...
Unpacking and Checking
1, Remove tooi from carton by liftingunit,
2. Place the tool on a secure, stationary work surface and
took the tool over carefully.
WARNING: For your own safety, never connect
plug to power source outlet, or insert switch key
until all assembly steps are complete and until you
have read and understood the entire owners man-
ual.
WARNING: To avoid injury, if any parts are miss-
ing, do not attempt to assemble the spindle sander,
plug in the power cord, or turn the switch on until
the missing parts are obtained and installed cor-
rectly.
Contents
List of Loose Parts
A Oscillating Spindle Sander ....................................... 1
B Owners Manual ........................................................ 1
C Holder Accessory ..................................................... 1
D Drum Sandpaper 1/2" reed....................................... 1
E Wrench ..................................................................... !
F Spacer Ring inserts
1"1.D......................................................................... 1
1-3/8" LD................................................................. 1
1-7/8" I.D.................................................................. t
2-3/8" I.D. (Installed ................................................. 1
3-3/8" I.D.................................................................. !
G Bag of Loose Parts
Containing the fo]towlng parts:
Rubber feet ............................................................... 4
Washer, Flat 21/64 x 7/8 x 3/64 ............................... 1
Washer, Flat 21/64 x 5/8 x 1/32 ............................... 1
Switch Key................................................................ 1
Loose Parts
A
F
1" Inside 1-318" Inside 1-7/8" Inside 3-3/8" Inside
Diameter D iameter Diameter Diameter
Spacer Ring Spacer Ring Spacer Ring Spacer Ring
Insert (1) Insert (1) Insert (1) Insert (1)
/_//
4#© ©
21164×718x3164 21164xSISx1132
Washer (1) Washer (1) Switch Key (1) Rubber Feet (4)
NOTE: The spindle sander is shipped with a 2" 1.D. diame-
ter drum, sanding sleeve and a 2-3/8" I.D. spacer ring
insert installed.
NOTE: Parts are not shown to actuai size.
Loading ...
Loading ...
Loading ...