Loading ...
Loading ...
Loading ...
WARNING: To avoid injury from accidental start-
ing, always turn switch "OFF", unplug the sander
and remove switch key before removing or replac-
ing the spacer ring inserts, sleeves and drums.
Changing and installing sanding sleeves for the 1t2"
diameter sanding drum:
1. Hand support sleeve and rubber drum on the spindle
and loosen 5/16-24" hex nut using the wrench supplied
as shown.
2, Remove the hex nut, upper spindle washer, sanding
sleeve, spacer ring insert, and rubber sleeve,
3. Remove the lower spindle washer and clean sawdust
from around the sawdust port,
NOTE: This cleaning is highly recommended when-
ever a wet/dry vac is not connected to the dust coftec-
tion port and used with sander. A dust buildup may
cause the oscillating motion to stop when the sawdust
port is blocked,
4, Slide the lower spindle washer onto the shaft (grooved
side down), The lower spindle washer is used with all
drums and sleeves.
5. Position 1" opening diameter spacer ring insert in the
table recess.
6. Locate 1/2" sanding sleeve and slide it on the spindle.
(No drum is used.)
7. Install the upper spindle washer and 5/16-24" hex nut
and tighten the hex nut with wrench while holding the
sleeve. Do not overtighten.
8. Remove the wrench and return it to the storage area
on the holder,
9, Plug the line cord in the power source and install the
key.
_ 5/16-24 Nut
_it "'--_----518" O.D. Washer
--.,-_ 1/2" Sanding Sleeve
_1" I,D, Spacer Ring
_.._. ower Spindle
_Washer
/
Selection Of Spacer Ring Inserts And Upper
Spindle Washers
WARNING: Using the wrong spacer ring insert may
permit small pieces of wood or finger tips to
become wedged between the abrasive surface and
the metal ring.
Sanding Sleeve
Outside Diameter
t/2 Inch
3/4 Inch
1 Inch
1-1/2 Inch
2 Inch
3 Inch
Spacer Ring insert
Opening Inside Diameter
1 Inch
1 Inch
1-3/8 Inch
1-7/8 Inch
2-3/8 inch
3-3/8 Inch
Upper Spindle Washer Size
5/8 Inch Outside Diameter
5/8 Inch Outside Diameter
7/8 Inch Outside Diameter
7/8 Inch Outside Diameter
1-3/4 Inch Outside Diameter
1-3/4 Inch Outside Diameter
1t
Loading ...
Loading ...
Loading ...