Loading ...
Loading ...
Loading ...
General operation
Operate deep cleaner only at voltage specified on data
plate on back of cleaner.
ON/OFF pedal
ON/OFF '
PEDAL
Plug deep cleaner into a properly grounded outlet.
Step on pedal to turn deep cleaner on. Step on pedal again to
turn deep cleaner off.
Handle release pedal
RELEASE
PEDAL
Step on pedal to lower handle to operating position. Handle
does not lock into a single position but floats to allow conve-
nient operation.
Auto m ati c " s h ut-off"
FLOAT DISK
When the recovery tank (lower tank) is full, the automatic "shut-
oft"mechanism will shut off the deep cleaner suction.
At that time, the red float disk will rise to the top of the recovery
tank lid (see illustration). The deep cleaner will no longer pick
up dirty solution and the motor sound will become noticeably
higher in pitch.
When this happens, turn deep cleaner off and empty recovery
tank before continuing use.
Check clean solution tank also; it may need to be refilled.
6 General operation - Filling solution tank
To transport
Turn deep cleaner off before transporting
m
To move your deep cleaner from room to room, put handle in
upright and locked position, tilt deep cleaner back on wheels,
and push forward.
The deep cleaner Rlay also be lifted by placing a hand under
the upper clean solution tank handle as shown.
The tanks
Clean solution tank (upper tank)
The clean solution tank holds the cleaning solution that is to be
dispersed onto the surface to be cleaned.
How to fill
Disconnect deep cleaner from electrical outlet.
TANK
Place handle in the upright, locked position.
To remove tank, press down on handle and pull forward.
Carry tank to a sink.
Rotate tank cap counterclockwise and lift up to remove cap.
Loading ...
Loading ...
Loading ...