Loading ...
Loading ...
Loading ...
Some models corrle with a hose and stair/upholstery nozzle.
How to attach hose
Disconnect deep cleaner from electrical outlet.
TANK _/
HANDLE
To prevent possible leaking, remove clean solution tank by
pressing down on tank handle and pulling forward; set tank
aside (do not set tank on furniture).
Remove hose from storage rack.
HANDLE
RELEASE
PEDAL
Step on handle release pedal and lower deep cleaner handle
until it rests on the floor.
Unlatch back part of recovery tank lid and remove lid.
Remove recovery tank front panel by sliding it straight up.
Replace panel with converter. Slide converter halfway down
opening until it is firmly in place.
I
SOLUTION
TUBE
Before connecting tube to cleaner,
make sure black tabs are extended
by pulling tan collar toward tube.
Open door on hood labeled "Stair/Upholstery Cleaning
Connection". Press round solution tube connector onto round
projection inside door.
Press connector collar down firmly to ensure that it is fully
connected.
TABS
The tank lid replaces in a hinge-like manner. Position front of
lid under tabs on front of tank. Rotate lid down onto tank.
Make sure lid is secure on all sides before cleaning,
For full suction, it is important that the recovery
tank lid is properly secured before cleaning.
Reverse procedure to remove hose and solution tube.
Raise deep cleaner handle to upright position.
I
TAB
\
Attach nozzle to connector end or hose by sliding it onto connec-
tor until the tab locks it securely.
Using your thumb, push forward and up on the latch to
remove nozzle.
Follow the instructions on pages 12 and 13 for the appropriate
cleaning task. Using stair/uph01stery nozzle 11
Loading ...
Loading ...
Loading ...