Loading ...
Loading ...
Loading ...
30
Figure 5-3 Sample of oil reset function (screen 2)
5. Message of [Reset success] displayed when Oil Reset function has successfully performed.
5.2. EPB
Electronic Parking Brake (EPB) System reset is a popular special function. You can use this function to reset
the electronic parking brake system and brake pads, which also supports the brake pad replacement (retraction,
release of the brake pump), G-sensor, and body angle calibration. This function has multiple uses and can
safely and effectively maintain the electronic brake system. These applications include deactivating and
activating brake control systems, assisting in controlling brake fluid, opening and closing brake pads, setting
brakes after replacing brake discs or brake pads, etc.
1. If the brake pad wears the brake pad sense line, the brake pad sense line will send a signal to the onboard
tablet asking for replacing the brake pad. After replacing the brake pad, you must reset the brake pad.
Otherwise, the car alarms.
2. Reset must be performed in the following cases:
⚫ The brake pad and brake pad wear sensor are replaced.
⚫ The brake pad indicator lamp is on.
⚫ The brake pad sensor circuit is short, which is recovered.
⚫ The servo motor is replaced.
The operation guidelines of the EPB function are shown below:
1. Enter the EPB menu and choose relevant models according to the vehicle being tested.
2. Follow the instructions displayed and press YES after completing the instructions shown.
Loading ...
Loading ...
Loading ...