Loading ...
Loading ...
Loading ...
4
- All Other Markets:
NOTE:
(*) Burner operating pressure is measured at the manifold test point with both burners operating at the 'High
Flame' setting.
NAT, LPG & Butane Only - Operating pressure is ex-factory set and is not to be adjusted, apart from when
converting between gasses, if required.
(**) TOWN GAS Only - Burner operating pressure is to be adjusted using the Town Gas adjustable gas
regulator supplied.
Refer to the ‘Gas Conversion and Specifications' section of this manual for further details.
For CT6 / CT9 - Gas supply connection point is located 130mm from the right hand side of the appliance,
32mm from the rear and 655mm from the floor and is accessed from beneath the appliance.
Gas Connection is ½ BSPT male.
LP Gas (Propane) LP Gas (Butane)
CT6 CT9 CT6 CT9
Input Rating
42 MJ/hr 63 MJ/hr 42 MJ/hr 63 MJ/hr
Supply Pressure
2.75 - 4.50 kPa 2.75 - 4.50 kPa
Burner Operating Pressure (*)
2.50 kPa (*) 2.50 kPa (*)
Gas Connection
½" BSP Male
Town Gas (**)
CT6 CT9 CT6 CT9
Input Rating 43 MJ/hr 64.5 MJ/hr 42 MJ/hr 63 MJ/hr
Supply Pressure
0.75 - 1.50 kPa 1.13 - 3.40 kPa
Burner Operating Pressure (*)
1.00 kPa (*) 0.63 kPa (*)
Gas Connection ½" BSP Male
Loading ...
Loading ...
Loading ...