Loading ...
Loading ...
Loading ...
17
- All Other Markets:
NOTE:
(*) Measure burner operating pressure at the manifold test point with both burners operating at 'High
Flame' setting.
NAT, LPG & Butane Only - Operating pressure is ex-factory set and is not to be adjusted, apart from
when converting between gasses, if required.
(**) TOWN GAS Only - Adjusted Burner operating pressure using the adjustable gas regulator
supplied.
Refer to information in this section for further details.
Main Burner Injectors
Ø 1.30mm Ø 1.20mm
Pilot Burner Injectors
0.23
Low Fire Adjustment
½ turn out (c.c.w.)
Burner Operating Pressure (*)
2.5 kPa (*)
Main Burner Aeration Shutter
15mm Open
Gas Regulator Cap Screw
Main Burner Injectors
Ø 2.10mm Ø 3.80mm
Pilot Burner Injectors
0.35 0.60
Low Fire Adjustment
1 turn out (c.c.w.) 2 turns out (c.c.w.)
Burner Operating Pressure (*)
1.0 kPa (*) 0.63 kPa (*)
Main Burner Aeration Shutter
15mm Open 15mm Open
Gas Regulator Cap Screw
Adjustable Regulator
(Adjust to Burner
Operating Pressure)
Loading ...
Loading ...