Loading ...
Loading ...
Loading ...
E25
CLEANING AND CARE
MICROWAVE OVEN CARE
EXTERIOR
The outside surface is precoated metal and plastic. Clean the
outside with mild soap and water, then rinse and dry with a soft
cloth. Do not use any type of household or abrasive cleaner.
STAINLESS STEEL SURFACE
The exterior should be wiped often with a damp soft cloth and
polished with a dry soft cloth to maintain its beauty. There is
also a variety of products designed especially for cleaning and
shining the stainless exterior of the oven. We recommend the
cleaner be applied to a soft cloth and then carefully used on the
stainless exterior rather than sprayed directly on to it. Follow
package directions carefully.
FRONT SIDE OF THE DRAWER
Wipe the window on both sides with a damp soft cloth to remove
any spills or spatters. Metal parts will be easier to maintain if
wiped frequently with a damp soft cloth. Avoid the use of spray
and other harsh cleaners, as they may stain, streak or dull the
drawer surface.
TOUCH SCREEN CONTROL
Wipe the panel with a soft cloth slightly damped with water
only, then wipe dry with a dry soft cloth. Do not scrub or use
any sort of chemical cleaners.
INTERIOR
Cleaning the interior is easy because no heat is generated to
interior surfaces, thus there is no baking and setting of spills or
spattering. To prevent the drawer closing and opening during
cleaning, lock the control panel.
To clean interior surfaces, including drawer sealing surfaces,
wipe with a damp soft cloth. For heavier soil, use mild soap and
wipe clean with a damp soft cloth.
IMPORTANT: DO NOT USE ABRASIVE OR HARSH
CLEANERS, CHEMICAL OVEN CLEANERS OR SCOUR-
ING PADS.
DRAWER GUIDES
Remove the food crumbs from the drawer guides. Wipe with a
dry soft cloth keep the Sharp Microwave Drawer
™
Oven opening
and closing smoothly.
WAVEGUIDE COVER
ATTENTION: The waveguide cover, located on the inside top
of the Sharp Microwave Drawer
™
Oven area, is made from mica,
so it requires special care. Keep the waveguide cover clean to
assure good microwave performance. Use a damp soft cloth to
carefully wipe any food spatters from the surface of the cover
immediately after they occur. Built-up splashes may overheat and
cause smoke or catch re. Do not remove the waveguide cover.
ODOR REMOVAL
Occasionally, a cooking odor may remain in the oven drawer. To
remove odor, combine 1 cup water, grated peel and juice of one
lemon and several whole cloves in a 2-cup glass microwave-safe
measuring cup. Boil for several minutes using 100% power.
Leave in the Microwave Drawer™ Oven until water cools. Wipe
interior with a soft cloth.
Loading ...
Loading ...
Loading ...