Loading ...
Loading ...
Loading ...
19
Connect Range to Gas Supply
• Install a manual gas line shut-o valve in the gas line in an easily accessed location
outside the range in the gas piping external to the appliance for the purpose of
turning on or shutting o gas to the appliance.
• Install male 1/2” flare union adapter to 1/2” NPT internal thread elbow at inlet of
regulator. On models equipped with standard twin burners, install the male pipe
thread end of the 1/2” flare union adapter to the 1/2” NPT internal thread at inlet of
pressure regulator. Use a wrench on the regulator fitting to avoid damage.
• Install male 1/2” or 3/4” flare union adapter to the NPT internal thread of the
manual shut-o valve, taking care to secure the shut-o valve to keep it from
turning.
• For Natural Gas (NG) the gas supply input pressure for checking the regulator
setting is 7inches and the output pressure is 5inches. For Liquid Propane Gas
(LPG) the gas supply input pressure for checking the regulator setting is 11inches
and the output pressure is 10inches.
• Connect the flexible gas line connector to the regulator on the range.
Position range to permit connection at the shut-o valve.
• When all connections have been made, check that all range controls are in the “o”
position and turn on the main gas supply valve.
• Leak testing of the appliance shall be conducted according to the manufacture’s
instructions. Use some soap water (50% water and 50% soap) or a leak detector
at all joints and connections to check for leaks in the system. Do not use a flame to
check for gas leaks.
GAS CONNECTIONS
Loading ...
Loading ...
Loading ...