Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/10603016-wav28k90me-01/bg36.png)
en Troubleshooting
54
Fault Cause Troubleshooting
The programme does not
start.
2. Press Start/Reload to start the
programme.
Childproof lock is activated.
▶
→"Deactivating the childproof
lock", Page41
- Ready In + is activated.
▶
Check whether - Ready In +
is
activated.
→"Buttons", Page24
Laundry is caught in the
door.
1. Open the door again.
2. Remove any trapped laundry.
3. Close the door.
4. Press Start/Reload to start the
programme.
The detergent drawer has
not been pushed in as far as
it can go.
▶
Push the detergent drawer in as far
as it will go.
The pump for the intelligent
dosing system is blocked.
1. Switch off the appliance.
2. Clean the pump unit.
→"Cleaning the detergent drawer",
Page44
3. If this indicator appears again, call
our after-sales service.
→"Customer Service", Page64
Note:You can start the washing pro-
gramme if you deactivate the intelli-
gent dosing system and dose manu-
ally.
→"Buttons", Page24
The door cannot beopened. is activated.
▶
Continue the programme by select-
ing
Spin or Drain and press-
ing Start/Reload .
→"Resuming the programme when
the programme status is Rinse
Hold", Page40
The temperature is too high.
▶
Wait until the temperature has
dropped.
▶
→"Cancelling the programme",
Page40
Water level is too high.
▶
Start the
Drainprogramme.
Power failure.
▶
Open the door using the emergency
release.
→"Emergency release", Page62
Loading ...
Loading ...
Loading ...