Loading ...
Loading ...
Loading ...
en Intelligent dosing system
42
3. Pour liquid detergent and fabric
softener into the relevant dis-
pensers.
→"Detergent drawer", Page20
4. Close the dispenser lid.
Note:To prevent the detergent
from drying out or drying up, do
not leave the dispenser lid open
for a long period of time.
5. Push in the detergent drawer.
6. Adjust the "basic dosage"
→Page42.
Dispenser contents
When it leaves the factory, the dis-
penser is set for fabric softener
. Al-
ternatively, you can also use this dis-
penser for a second liquid detergent
.
Notes
¡ If you change the content of the
dispenser, the basic dosage for
this dispenser is reset.
¡ If you use both dispensers for li-
quid detergent, you must select a
dispenser which is to be used dur-
ing washing.
Adjusting the dispenser contents
1. Press and hold
i-DOS for ap-
prox. 3 seconds.
2. To set , press i-DOS.
a The display shows .
3. To set , press i-DOS again.
4. To end the setting process, wait
briefly.
Basic dosage
You can adjust the preset basic
dosages for liquid detergent and fab-
ric softener.
The basic dosage depends on the
manufacturer's instructions for the de-
tergent, the water hardness and the
degree of soiling of the laundry.
Always set a basic dosage that cor-
responds to the dosage for a stand-
ard load of 4.5 kg.
→"Detergent dosage", Page37
Adjusting the basic dosage
You can individually adjust the basic
dosages for each dispenser.
1. Press and hold
i-DOS for ap-
prox. 3 seconds.
a The display shows the basic
dosage set for
.
2. To adjust the setting, press - / +.
3. To end the setting process, wait
briefly.
Note:To adjust the basic dosage for
, repeat the steps with i-DOS.
Loading ...
Loading ...
Loading ...