Loading ...
Loading ...
Loading ...
en Troubleshooting
52
Fault Cause Troubleshooting
"E:30 / -80"
▶
If intelligent dosing is activated, re-
duce the "basic dosage"
→Page42.
▶
If you dose manually, reduce the
amount of detergent for the next
washing cycle with the same load.
Unapproved extension in-
stalled on the water drain
hose.
▶
Remove any unapproved exten-
sions from the water hose.
→"Connecting the appliance",
Page17
"E:36 / -25 / -26" Drain pump is blocked.
▶
→"Cleaning the drain pump",
Page46
"E:10 / -00 / -10 / -20" The pump for the intelligent
dosing system is blocked.
1. Switch off the appliance.
2. Clean the pump unit.
→"Cleaning the detergent drawer",
Page44
3. If this indicator appears again, call
our after-sales service.
→"Customer Service", Page64
Note:You can start the washing pro-
gramme if you deactivate the intelli-
gent dosing system and dose manu-
ally.
→"Buttons", Page24
The water pressure is low. No remedial action possible.
The filter in the water inflow
is blocked.
▶
"Clean the water inflow filter"
→Page50.
The tap is turned off.
▶
Turn on the tap.
The water inlet hose is
kinked or jammed.
▶
Ensure that the water inlet hose is
not kinked or jammed.
"E:35 / -10" There is water in the base
trough.
▶
Turn off the water tap.
▶
Call the after-sales service.
→"Customer Service", Page64
The appliance is leaking.
▶
Turn off the water tap.
▶
Call the after-sales service.
→"Customer Service", Page64
The detergent drawer has
not been pushed in as far as
it can go.
▶
Push the detergent drawer in as far
as it will go.
Loading ...
Loading ...
Loading ...