Loading ...
Loading ...
Loading ...
52 | [email protected] | 1-800-828-7280
Care, cleaning and storage
Float valve and silicone cap
Remove the oat valve from the lid
Place one nger on the at top of oat
valve, then turn the lid over. Detach the
silicone cap from the bottom side of the
oat valve, and remove the oat valve from
the top of the lid.
Do not discard the oat valve or
silicone cap!
Top
Bottom
Install the oat valve
Drop the narrow end of the oat valve into
the oat valve hole on the top of the lid.
Place one nger on the at top of the oat
valve, then turn the lid over. Firmly attach
the silicone cap to the bottom of the oat
valve.
Condensation collector
The condensation collector sits at the back
of the multicooker base and catches any
overow from the condensation rim.
Remove the condensation collector
Pull the condensation collector away from
the multicooker base; do not pull down.
Note the tabs on the multicooker base
and the grooves on the condensation
collector.
Install the condensation collector
Align the grooves on the condensation
collector over the tabs on the back
of the multicooker base and slide the
condensation collector into place like
closing a drawer.
QuickCool protective cover
Remove the protective cover
Grip the tab and push it towards the lid
handle, then pull it up, towards you,
and off.
Install the protective cover
Grip the tab and slide the cover towards
the back of the metal portion of the lid,
then press down until it clicks.
Loading ...
Loading ...
Loading ...