Thor Kitchen TMD2401 Manual Spec Sheet

Loading ...

STEP 1

Cut along dotted line separating template from

instruction sheet. See Fig. 1

STEP 2

On the template, cut out the square box following the

dotted line. Remove the cutout portion. See Fig. 2

STEP 3

Place a strip of painter’s or masking tape at the bottom

center of the microwave window. See Fig. 3

STEP 4

Using a ruler or tape measure, measure from the left side of the

door to the middle and place a mark on the tape at 11 7/8”. This

will represent the center of the drawer. See Fig. 4

STEP 5

Place the template on to the microwave and align the top edge

of the template to the bottom of the window. Align the center

mark made on the tape to the centerline mark on the template.

Once template is aligned with all marks tape it to the drawer.

See Fig. 5

STEP 6

Remove backing tape off of THOR Kitchen logo and align

it into the square opening on the template. Press logo

ﬁrmly in to place once it is centered. See Fig. 6

STEP 7

Remove template and tape.

24 INCH MICROWAVE DRAWER - TMD2401

LOGO / BADGE INSTALLATION

FINAL

FIG. 6

FIG. 5

FIG. 4

FIG. 3

FIG. 2

FIG. 1

Lookin’ good!

BADGE INSTALLATION GUIDE

Loading ...

Thor Kitchen TMD2401 24 Inch Microwave Drawer