Loading ...
Loading ...
Loading ...
AUDIBLE SIGNAL ELIMINATION
At the end of timed cook, beeps will sound. The audible
signal can be turned off if you prefer quiet operation.
To Turn Sound Off
1. Touch Setup/Help pad.
2. Touch Setup/Help pad again.
3. Touch Start /Add-A-Minute pad. The display shows
SOUND OFF.
To Restore Sound
1. Touch Setup/Help pad.
2. Touch Setup/Help pad again.
3. Touch Start /Add-A-Minute pad. The display shows
SOUND ON.
END OF COOKING REMINDER
At end of timed cooking, the microwave will signal every
10 seconds for the first minute; then every 3 minutes until
Stop/Clear pad is touched, up to one hour.
To Turn Reminder Off
1. Touch Setup/Help pad three times. The display shows
REMIND SIGNAL OFF? TOUCH START.
2. Touch Start /Add-A-Minute pad. The display shows
REMIND SIGNAL OFF.
To Turn Reminder Signal Back On
1. Touch Setup/Help pad three times. The display shows
REMIND SIGNAL ON? TOUCH START.
2. Touch Start /Add-A-Minute pad. The display shows
REMIND SIGNAL ON.
AUTO START
If you wish to program the Drawer Microwave to begin
cooking automatically at a designated time of day, follow
this procedure.
1. Touch Setup/Help pad 4 times. The display shows AUTO
START TOUCH START.
2. Touch Start /Add-A-Minute pad.
3. Enter start time.
4. Touch Timer/Clock pad.
5. Touch the number keys to enter cooking time.
Touch Power Level pad repeatedly until the desired power
level is reached.
6. Touch Start /Add-A-Minute pad.
DEMONSTRATION MODE
To Select Demo Mode
1. Touch Setup/Help pad five times. The display shows
DEMO ON? HOLD START 3 SEC.
2. Hold Start /Add-A-Minute pad for 3 seconds. The dis-
play shows DEMO ON.
To Cancel Demo Mode
1. Touch Setup/Help pad five times. The display shows
DEMO OFF? TOUCH START.
2. Touch Start /Add-A-Minute pad. The display shows
DEMO OFF.
NOTE:
• Drawer Microwave doesn’t heat in Demo Mode.
• Display counts down quickly.
TIMER
1. Touch Timer/Clock pad and number 1.
2. Enter time.
3. Touch Timer/Clock pad again.
To cancel timer, touch Stop/Clear.
STANDBY MODE
This microwave will go into standby mode after a period of
inactivity. The backlight of the display will automatically
dim after 3 minutes if the unit has not been in operation.
If the display is in standby mode, simply touch the control
panel or open/close the door to return the backlight to
maximum brightness.
SETTINGS
17
Loading ...
Loading ...
Loading ...