Loading ...
Loading ...
Loading ...
7
A. Water dividing pipe：with nine little holes, water will flow out from these little holes. And if no
water flows out, can be disassembled and cleaned.
B.
Evaporator
(ice-making
module)
C. Ice full detecting board: Use to detect the inner cabinet is full of ice or not, and to check the the
ice-harvest process is over or not.
D．Water tank：
E．Water supplying pipe：
F．Cover board on the right side of the evaporator：
G．Water level switch installing plate：
H．Water drain pipe of the water tank：when ice-making, this pipe should be clamped in the slot of
the water tank wall; And when draining, this pipe should be pulled out.
I．Water pump：
J．Water level detecting switch
3) Operation panel
A．“ADD WATER”light：
When the light flashes, it means the water supplying now;
and when the light is on always, it means absence of water in unit.
B．“TIMER”light：
When this light is on, it means setting with the TIMER。
When the unit is turned off, can set with the ON-TIMER;
and when the unit is on, can set with OFF-Timer.
C．“ICE”light：
If the light is on, means the unit is making ice;
And if the light flashes, means the unit is during the ice-harvest process.
D．“FULL”light：
When the unit is full of the ice cube, the light will be on.
E．“CLEAN”light：
When this light is on, water pump cleaning start.
When the light flashes, water pump cleaning stop.
F．“+”、“-”button：
Use to adjust the ice-making process duration period length, the default setting is zero, 1
minute adding or decreasing per each pressing of “+” or “-” button.
Also to adjust the delay time of the timer, the default setting is zero, 1 hour adding or
decreasing per each pressing of “+” or “-” button.
G．“88”digital window：
At normal condition, the number in the window is on always, it means the ambient
Loading ...
Loading ...
Loading ...