Loading ...
Loading ...
Loading ...
19
Ice
Making
Assembly
System
Cleaning
by
Using
Nu-Calgon
Nickle
Safe
Ice-machine Cleaner
Minerals that are removed from water during the freezing cycle will eventually form a hard
scaly deposit in the water system. Cleaning the system regularly helps remove the mineral
scale
buildup.
How
often
you
need
to
clean
the
system
depends
upon
how
hard
your
water is. With hard water of 4 to 5 grains/liter, you may need to clean the system as often
as every 6 months.
1.
Turn
off
the
ice
maker.
Keep
the
ice
maker
connect
to
the
water
supply
and
drainpipe. But shut off the water faucet of main water supply.
2. Open the doorand scoopout all of the ice cubes. Either discard them or save them
in
an
ice
chest
or
cooler.
3. Making the cleaning solution. Please mix the Nu-Calgon Nickle Safe Ice Machine
Cleaner with water to make the cleaning solution.
Use
a
plastic
or
stainless
container
with
more
than
4
liters
capacity,
mix
300
ml
Nu-Calgon Nickle Safe Ice-machine Cleaner（Can be replaced with a similar cleaning
agent）with 2.8 liters warm water about 122-140℉,Then divide them for 2 shares
equally
in
2
cups.
It
is
better
to
keep
the
temperature
of
each
cup
of
the
cleaning
solution.
4. Check to be sure that the water drain pipe of the water tankhasbeen installed
properly
in
the
slot
of
the
tank
wall.
Then
Pour
one
cup
of
Nickel-Safe
Ice
Maker
Cleaning Solution into the water tank. Wait about for 5 minutes.
5. Turn on the power to the ice maker, then press “
TIMER CLEAN”
button on control
panel for more than 5 seconds, to enter the self-Cleaning program. Same as above
explanation, the water pump runs for 8 minutes and stops for 3 minutes, one cycle,
again
one
cycle.
The
total
duration
time
is
30
minutes
for
one
self-cleaning
program.
During this process, the “CLEAN”light will always be on during this period, and the
digit
window
will
indicate
the
left
time,
6. After 30 minutes of one self-cleaning program completing, pull out the drain pipe of
Loading ...
Loading ...
Loading ...