Loading ...
Loading ...
Loading ...
iDS-2CD7xxG0-xxxxx Network Bullet Camera User Manual
UM iDS-2CD7xxG0-xxxxx 021021NA 94
Face Counting Algorithm Parameters
It is used to set and optimize the parameters of the algorithm parameters for Face Counting.
These functions vary according to different models.
• Face Capture Mode: Current algorithm version, which cannot be edited.
• Best Shot: The best shot after the target leaves the detection area.
• Capture Times: Capture times a face will be captured during its stay in the configured area. The
default value is 1.
• Capture Threshold: Quality of face to trigger capture and alarm. Higher value means better quality
should be met to trigger capture and alarm.
• Face Exposure: The device adjusts the face brightness when it detects face in the image.
• Reference Brightness: The reference brightness of a face in the face exposure mode. If a face is
detected, the camera adjusts the face brightness according to the value you set. The higher the
value, the brighter the face.
• Min. Duration: The minimum duration the camera exposes the face.
If face exposure is enabled, make sure WDR is disabled and manual iris is selected.
• Real-Time Update Data: After enabled, the real-time people counting data will be uploaded to the
platform.
• Data Statistics Cycle: Select the data statistics cycle as required.
• Algorithm Validity: The higher the value, the more difficult it is to detect the target, but the higher
the detection accuracy.
• Restore Defaults: Click Restore to restore all the settings in advanced configuration to the factory
defaults.
View Face Counting Result
Steps
1. Go to Application.
2. Set search condition and click Counting. Matched results are shown in Face Picture Comparison
Statistics and People Counting Statistics area.
Queue Management
Use to count queuing-up people number and waiting time of each person.
Queue management is supported only by certain models.
Loading ...
Loading ...
Loading ...