Loading ...
Loading ...
Loading ...
iDS-2CD7xxG0-xxxxx Network Bullet Camera User Manual
UM iDS-2CD7xxG0-xxxxx 021021NA 59
Set Wireless Dial
The built-in wireless module offers dial-up access to the Internet for the device.
Before You Start
Get a SIM card, and activate 3G/4G services. Insert the SIM card into the corresponding slot.
Steps
1. Go to Configuration → Network → Advanced Settings → Wireless Dial.
2. Check to enable the function.
3. Click Dial Parameters to configure and save the parameters.
4. Click Dial Plan. See Set Arming Schedule for detailed information.
5. Optional: Set White List. See Set White List for detailed information.
6. Click Dial Status.
• Click Refresh: Refresh the dial status.
• Click Disconnect: Disconnect the 3G/4G wireless network.
When the Dial Status turns to Connected, it means a successful dial.
7. Access the device via the IP Address of the computer in the network.
• Input the IP address in the browser to access the device.
• Add the device in client application. Select IP/Domain, and input IP address and other parameters to
access the device.
Set White List
Add the administrator’s mobile phone number to the white list to receive alarm message from the device.
Steps
1. Go to white list settings page: Configuration → Advanced Configuration → Wireless Dial → White List.
2. Check Enable SMS Alarm.
3. Click
in the white list.
1) Input the mobile phone number to receive alarm message.
2) Check Reboot via SMS.
3) Select the events, and the mobile phone can receive the alarm message when the event happens.
Loading ...
Loading ...
Loading ...