Loading ...
Loading ...
Loading ...
20
11. Empty the container used to collect the water from the
rst rinse. Remove and empty the water tank, then ll
with fresh drinking water up to the MAX level (g. 48) and
reinstate the softener lter, if in use; return the tank to the
machine and reposition the container under the spouts;
12. Press the
button (which blinks rapidly) to start the
rinse: the strong intensity Led blinks to indicate that step
3 of the descale cycle is in progress;
the rinse uid will
ow from the hot water spout; (*)
Step 4:
Completion of descale
procedure
13. When the Led relative to the pre-ground function lights
up, the descale cycle has been correctly terminated;
14. The indicator of the grounds container (C4)lights up:
remove the container in which the rinse water is collect-
ed and empty it; take out the drip tray and empty the
grounds container, where part of the rinse water will have
been collected. Reposition all the parts in the machine.
15. The “no water” indicator (C2)lights up: remove the tank
and ll with fresh drinking water. Reposition the water
tank in the machine.
The machine is ready for use.
Please note:
• After descaling, it is normal for the grounds container to
contain water.
• (*) If the water tank has not been lled to the MAX level,
at the end of descaling, the appliance requests a third
rinse to guarantee that the descaler solution has been
completely eliminated from the machine's internal cir-
cuits. In this instance, repeat step 3 from point 11.
17. EXPLANATION OF LIGHTS
Indicator/Led Meaning
Drink indicators blinking The machine is warming up:
wait
Drink and settings indicators
permanently alight
The machine is ready for
use: select the desired drink
and relative options
Replace the lter (see
section “4. Water softener
lter”)
→
Indicator/Led Meaning
Insucient water in tank:
ll the tank
The water tank is missing, or
is not positioned correctly:
ensure the tank is correctly
in place
General alarm: the inside of
the machine is very dirty.
Clean the machine thor-
oughly. If the message is
still displayed after cleaning,
contact De’Longhi Customer
Services and/or an approved
Service Centre
The infuser has not been
replaced after cleaning:
reinstate the infuser as
described in section “15.
Cleaning the infuser”
No coee beans: ll the
beans container, then press
any button to exit the alarm
condition.
A selection has been made
using pre-ground coee
without putting the coee
in the relative funnel (A3)
→
Loading ...
Loading ...
Loading ...