Delonghi ECAM290.62.B EX:2 Instructions for Use

Loading ...

• Use only descaler supplied by De’Longhi. Using unsuitable

descaler and/or performing descaling incorrectly may re-

sult in faults not covered by the manufacturer’s guarantee.

• Descaler can cause damage to delicate surfaces. If the

product is accidentally spilt, dry immediately.

To descale

Descaler De’Longhi descaler

Container Recommended capacity: 2l

Time ~30min

Accessory Hot water spout (D5)

Important:

If the water softener lter is installed, it must be re-

moved before adding the descaler solution.

Thereafter, reinstate the lter at the start of step 3

Descale the machine when the indicator lights up on the

control panel (C4). This same indicator will blink while the des-

cale cycle is in progress.

Please note:

• Once the descaling cycle has begun, it cannot be inter-

rupted and must be concluded with the full rinse cycle.

With this in mind, make sure there is sucient descaler.

Proceed as follows:

1. Make certain that the water spout (D5) is tted;

Step 1: Descaling

action

2. Press the button (B5) and hold for at least 5 sec-

onds, until the relative Led starts blinking rapidly. The

mild intensity Led lights up to indicate that step 1 of the

descale cycle is in progress;

3. Empty the drip tray (A14) and the grounds container

(A10) and reposition them; empty the water tank com-

pletely (A9) and remove the softener lter (if installed);

4. Pour the descaler into the tank, lling to level A (which

corresponds to a 100ml pack) marked on the side (back) of

the tank (g. 42); next, add water (one litre) up to level B

(g. 43); nally, reposition the water tank in the machine;

5. Place an empty container of at least 2 litres capacity under the

coee spouts (A17) and the water spout (D5) (g. 44).

6. Press the

button to start the descaling cycle; the

indicator light blinks to conrm that step 1 is in progress;

7. For 15 minutes or so, the machine alternates automati-

cally between pausing and releasing liquid from the hot

water spout and the coee spout.

When the rst step of the descaling cycle has been completed,

the low water level indicator (C2) will light up.

Step 2: First rinse

8. Empty the container used to collect the descaler solution. Re-

move and empty the water tank, rinse under running water, then

ll with fresh drinking water up to the MAX level (g. 45) and re-

turn it to the machine: reposition the container under the spouts;

9. Press the button (which blinks rapidly) to start the

rinse: the medium intensity Led blinks to indicate that

step 2 of the descale cycle is in progress;

10. The machine will proceed automatically with rinsing of

the coee and hot water spouts;

When the second step of the descaling cycle has been complet-

ed, the low water level indicator (C2) will light up.

Step 3: Second rinse

Loading ...

Delonghi ECAM290.62.B EX:2 Magnifica Evo FULLY AUTOMATIC COFFEE MACHINES

Instructions for Use - Page 19