Loading ...
Loading ...
Loading ...
12
25
26
Leave the milk carafe in the machine (there is no need to empty
the container);
5. Place a cup or other recipient under the milk spout (g. 26);
6. Press the button: hot water and steam will be re-
leased from the milk spout. Cleaning stops automatically;
Where various drinks are prepared in succession:
• Proceed with cleaning of the carafe after the nal
preparation.
After multiple preparations, the milk carafe is empty or
the milk that remains is not enough to make further drinks
• Having carried out the cleaning step with the ,
button, disassemble the milk carafe and clean all compo-
nents, proceeding as described in the section “14. Thor-
ough cleaning of milk carafe”.
After multiple preparations, there is enough milk left in
the carafe to make further drinks
• Having carried out the cleaning step with the button,
remove the milk carafe and put it straight in the refriger-
ator. The carafe still containing milk can be kept in the
refrigerator for no more than 2 days, after which time all
components should be cleaned, proceeding as described
in the section “14. Thorough cleaning of milk carafe”.
Important:
If the milk carafe is left out of the refrigerator for more than
30 minutes, disassemble and clean all components, proceed-
ing as described in the section
“14. Thorough cleaning of milk
carafe”.
Following preparation of milk-based drinks — general
notes:
• In certain cases, the machine will need to heat up before
cleaning can take place.
• Wait for the operation to be completed. The function is
automatic. Do not stop the machine while cleaning is in
progress.
9.8 Customising the quantity in the cup
1. Press the button relative to the milk-based drink being
programmed, and hold for a few seconds. The light blinks
rapidly to indicate that the programming menu is active.
Delivery begins;
2. Once the cup is lled to the desired level, press the drink but-
ton again. Delivery of the rst ingredient stops and delivery of
the second ingredient begins;
3. Once the cup is lled to the desired level, press the button
a second time. Delivery ceases and the quantity is stored
in the memory.
Please note!
• To cancel the current setting, press a button corre-
sponding to another drink.
• For the My Milk drink, only the quantity of coee can
be programmed, while all the milk will be used as in
the recipe.
10. DELIVERING HOT WATER
Danger of scalding!
Never leave the machine unattended when hot water is being
released.
1. Insert the hot water spout (g. 27).
27
28
2. Place a container under the hot water spout (g. 28) (as
close as possible to avoid splashes).
3. Press the Hot water button
.
4. Delivery will stop automatically. To terminate the delivery
sooner, press the
button a second time.
Please note:
In energy saving mode, a few seconds may elapse before hot
water emerges as the appliance must heat up.
10.1 Customising the quantity of hot water
1. Press the
Hot water button and hold for a few sec-
onds: the light blinks rapidly to indicate that the program-
ming menu is active. Delivery begins;
2. Once the cup is lled to the desired level, press the button
a second time. Delivery ceases and the quantity is stored
in the memory.
Default (ml) Programmable (ml)
Hot
water
250
from ≃ 20 to ≃ 420
Loading ...
Loading ...
Loading ...