Loading ...
Loading ...
Loading ...
●
Clearing Pairing Information from a
Phone
iPhone Users
1.
Y On the Home Screen, tap
“Settings” n “Bluetooth”.
2.
Y Next to “CASIO GBA-400”, tap g.
3.
Y Tap “Forget this Device”.
This clears the watch’s pairing
information from the phone.
Android Users
1.
Y On the App screen tap: “Settings”
n “Bluetooth”.
2.
Y Tap j next to “CASIO GBA-400”.
3.
Y Tap “Unpair”.
This clears the watch’s pairing
information from the phone.
4.
Y Scroll the status bar downwards
and open the notification panel.
5.
Y Tap e (Bluetooth) to disable
Bluetooth, and then re-enable it.
Note
●
Note that the actual operation
you need to perform depends
on the type of phone you are
using. For details, see your
phone documentation.
●
Clearing Pairing Information from
the Watch
1.
X Hold down the (C) button for about
two seconds.
2.
X Press (C) five times to enter the
Setup Mode.
[SETUP] will appear on the display
followed by the watch device name.
Device name
3.
X Hold down the (A) button for about
two seconds.
Clearing pairing information will
cause the message [NOT YET
PAIRED!] to scroll from right to left on
the watch display.
4.
X Press (C) to return to the
Timekeeping Mode.
Connecting with Another Phone
You need to perform the operation below
whenever you buy a different phone or
when you want to establish a Bluetooth
connection with another phone.
1. Clearing Pairing Info
2. Pair the watch with the phone.
Connecting a Different Watch to a
Phone
You should perform the steps below
before pairing a different watch with the
phone, such as after you buy a new
watch.
●
Pairing the Watch with a Phone
1.
Y In the upper right corner of the G-
SHOCK+ top screen, tap i to
display the “Connection settings”
screen.
2.
Y Tap “Connect new watch”.
3.
Y Select the name of the watch you
want to connect to and then tap
“Next”.
●
From this point, follow the
instructions that appear on your
phone’s screen to complete the
pairing operation.
●
Connecting with a Watch that is
Already Paired
1.
Y In the upper right corner of the G-
SHOCK+ top screen, tap i to
display the “Connection settings”
screen.
2.
Y From the “Previously registered
watch” list, tap the name of the phone
you want to connect with.
3.
Y Tap “Connect to this ***”.
●
Follow the instructions that appear
on your phone’s screen to
complete the connection
operation.
Important!
●
A phone can be connected with
only one watch at a time. To
connect to another watch, you
need to terminate the current
connection.
Watch Settings
While the watch is connected to a phone,
it will automatically adjust its date and
time settings to those of the phone. If the
watch is not connected to a phone, use
the procedure below to adjust its date
and time settings.
Getting ready
Perform this procedure in the
Timekeeping Mode. Use (C) to navigate
to the Timekeeping Mode.
l Navigating Between Modes
Timekeeping Mode
Operation Guide 5413
7
Loading ...
Loading ...
Loading ...